Page 33/42
February 2021
MULCHING MOWER MASTER SERIES | User manual
9.
SERVICING AND COMMISSIONING
Servicing is a fundamental element of a long service life and proper functioning of every piece of agricultural
machinery. By maintaining and servicing the machine, you not only guarantee a good functioning, but also a longer
machine service life and optimum safety when working with the machine.
The operating times specified in this manual are for information only and refer to normal conditions of use.
Depending on the application, they may differ.
Clean the grease nipples before applying the grease. This will prevent mud, dust, or other foreign materials from
mixing with the grease, thereby reducing the lubrication effect.
When adding oil or replacing the oil, we recommend using the same oil in order to avoid mixing oils with different
properties.
Stop the engine, switch off the power take-off, apply the tractor's handbrake and place the equipment horizontally
on the ground before servicing the machine.
After a few hours of operation, check that all bolts and nuts are tight. Also periodically check all safety devices.
9.1
First inspection on commissioning
Check the correct drive belt tension and alignment. Check that all bolts and nuts are tight. Replace the transmission
oil after the first 50 hours of operation.
Fill the power take-off transmission and the drivetrain if necessary as instructed for this type of mower unit.
Lubricate all bearings of the drive shaft and the rear roller thoroughly with a grease gun.
