Routine Service and Maintenance
4.23
5. Loosen the intake hose clamp (Item 2,
Figure 4–22
) at the top of the fuel filter
assembly (Item 1,
Figure 4–22
). Slide the clamp along the fuel line (Item 3,
Figure
4–22
) away from the fuel filter assembly.
Figure 4-24 Fuel Filter
6.
Pull the fuel line off the fuel filter assembly and place the line in a suitable sized
container.
NOTE:
a. Each of the fuel tanks holds approximately 4.5 gallons of fuel.
b. Make sure that the fuel hose is positioned lower than the fuel valves to make sure that
all fuel is drained from the tanks.
7. Open the fuel valves on the bottom of each tank and allow the fuel to drain into the
drain pan.
8.
Install a new spin on fuel filter (Item 4,
Figure 4–24
) as described earlier in this
section.
NOTE
:
•
The used fuel filter will be filled with diesel fuel. Make sure to drain the fuel from the
filter into an appropriate container.
•
Dispose of the used fuel filter in an appropriate manner and according to State and Local
regulations.
9.
Install the fuel line onto the fuel filter assembly.
10.
Secure the fuel line onto the fuel filter assembly using the spring clamp removed
earlier.
5
5
3
1
4
2
Summary of Contents for 700HDX
