background image

3

Hardware and Tool Guide

Before You Assemble

Before You Assemble

Please take the time to read all assembly instructions before 
attempting to assemble your  Bowflex

®

 SelectTech

®

 3.1 Bench. 

The best place for your Bowflex

®

 SelectTech

®

 3.1 Bench is on a 

hard, level surface. 

Basic Assembly Principles

Here are a few basic tips that will make your assembly of the 
Bowflex

®

 SelectTech

®

 3.1 Bench quick and easy. By using these 

principles, you can simplify each process and save yourself extra 
time and effort.

1.  To make the assembly process go faster, gather the pieces 

you need for each step and thoroughly read the assembly 
instructions for that step prior to starting assembly for the 
step.

2.  When tightening a locknut on a bolt, use a combination 

wrench to grip the locknut and ensure that it is fastened 
securely.

3.  When attaching two pieces, gently lift and look through the 

bolt holes to help guide the bolt through the holes.

4.  As a general rule, and for all bolts and nuts on your Bowflex

®

 

SelectTech

®

 3.1 Bench, turn bolts or nuts toward the right 

(clockwise) to tighten and left (counterclockwise) to loosen.

Tools Required:

• 9/16 Socket

• 9/16 Wrench or Adjustable wrench

• 7/32 Allen Wrench (provided)

• 3/16 Allen Wrench (provided)

Descr: Allen Bolt - 3/8 x 3

Qty: 2

Descr: Flat Washer 5/16

Qty: 10

Descr: Lock Nut 3/8-16

Qty: 2

Descr: Flat Washer 3/8

Qty: 7

Descr: Allen Bolt - 5/16 x 2 1/2

Qty: 10

Descr: Allen Bolt - 3/8 x1

Qty: 3

Descr: End Cap 3/4”

Qty: 2

Hardware:

NOTE: Illustrations not to scale.

Summary of Contents for SelectTech 3.1

















Reviews: