background image

1

Important Safety Instructions

WARNING!

Before beginning any exercise program consult your physician or health care professional. 

Only he or she can determine the exercise program that is appropriate for your particular 

age and condition. If you experience any light-headedness, dizziness, or shortness of 

breath while exercising, stop the exercise and consult your physician.

Read all instructions and warning labels before using the equipment.

-  It is your responsibility to read and understand all 

warnings and instructions. This is essential to safe 

operation.

-  Keep your body weight centered on the bench while 

exercising.

-  Never allow children on the bench. Teenagers should 

always have parental supervision when using this 

bench.

- Set up and operate bench only on a level surface.

-  Do not wear loose clothing while you are near the 

bench.

-  Do not exceed the max. user weight of 300 lbs 

(136.1 kg).

-  Do not exceed the maximum lifting load of 180 lbs 

(81.6 kg).

-  Keep at least 50” (1.3 m) clear on each side of the 

bench. This is the recommended safe distance for 

access and passage around the bench.

-  The approximate weight of this bench is 55 lbs (25 

kg).

- This bench is for home use only.

-  Before exercising, make sure the back and seat 

supports are securely fastened and the bench is 

firmly in place.

-  Inspect your bench before each workout. Periodically 

check all fasteners to make sure none have loosened 

with use.

-  Never attempt to exercise with more resistance than 

you are physically able to handle.

-  For safety, it is recommended that you exercise with 

a training partner or spotter.

-  Do not use the bench if any component is found worn 

or damaged.

-  This product, its packaging, and components 

contain chemicals known to the State of California 

to cause cancer, birth defects, or reproductive 

harm. This Notice is provided in accordance with 

California’s Proposition 65. If you would like additional 

information, please refer to our Web site at www.

nautilus.com/prop65.

Indicates a potentially hazardous situation which, if not 

avoided, could result in death or serious injury.

The following definition applies to the word “WARNING” found throughout this manual:

W A R N I N G

A T T E N T I O N

D A N G E R

IMMEDIATE ACTION REQUIRED

C A U T I O N

Summary of Contents for SelectTech 3.1

















Reviews: