6
Assembly Instructions
STEP 1: Secure the Seat Assembly
Parts:
• Seat Assembly on home gym
• (1) Support Bracket - Item 8
• (1) Seat Locking Pin - Item 9
Hardware:
• (4) Bolts under Seat at mounting bracket
• (1) 3/8” X 5-3/4 Allen Bolt - Item 10
• (2) 3/8” Washers - Item 14
• (1) 3/8” Nut - Item 16
Tools:
• 7/32” Hex Wrench
• 3/16” Hex Wrench (for seat bolts)
• 1/2” Hex Wrench (for seat bolts on older
Bowflex Xtreme
®
2 model)
Figure 1a - Remove seat pad to install
support bracket
Figure 1b - Installed support bracket
(seat pad not shown for clarity)
Assembly Steps:
1-1 If your home gym is equipped with a Leg Extension
attachment, make sure that the Leg Extension is not
installed under the seat.
1-2 If your home gym seat is equipped with a Seat Locking Pin
(9), secure the Seat Assembly on the Seat Support Rail with
the Seat Locking Pin. Go to Step 2.
If your home gym is not equipped with a Seat Locking
Pin, detach the Seat Pad from the Seat Backbone by
unscrewing the 4 seat bolts in the seat mounting bracket.
1-3 Slip the Support Bracket (8) onto the Seat Backbone and
secure with the Allen Bolt (10), Washers (14) and Nut (16).
See
Figure 1a
and
1b
. Reattach the Seat Pad to the Seat
Backbone with the 4 seat bolts and washers.
1-4 Secure the Seat Assembly and Support Bracket on the Seat
Support Rail with the Seat Locking Pin. See
Figure 1b
.
Seat Pad
Seat backbone
Seat support
rail
8
10
9
Seat
bolt &
washer
9
8
14
16
10
