Bowflex BXT8J Service Manual Download

Page: 3 / 149

SAFETY WARNING LABELS AND SERIAL NUMBER

Serial Number

Product Specification

CAUTION!

Risk of Injury to Persons - To Avoid injury, use extreme caution

when stepping onto or off of a moving belt. Read instruction

manual before using.

WARNING!

Read, understand and obey all warnings on this machine.

Keep children away. Not intended for use by anyone under 14

years of age.

Refer to owner’s manual for additional warnings and safety

information.

Injury or death is possible if caution is not used while using this

machine.

The maximum user weight for this machine is 300 lbs (136 kg).

The heart rate displayed is an approximation and should be

used for reference only.

For Consumer Use Only.

Consult a physician prior to using any exercise equipment.

When the machine is not operation, remove the Safety Key and

keep out of the reach of children.

WARNING!

- Moving parts can crush and cut.

- Keep guards in place.

- Lock out power before servicing.

WARNING!

HAZARDOUS VOLTAGE.

- Contact may cause electrical shock or burn.

- Turn off and lock out power before servicing.

REVISIONS

ECO

REVISION

REV DESCRIPTION

APPROVED

DATE

TITLE.

PART NO.

REV.

SHEET 1 OF 1

SCALE: 1:1

DO NOT SCALE DRAWING

1. ALL ITEMS MUST BE RoHS COMPLIANT

2. ALL DIMENSIONS APPLY BEFORE PLATING OR COATING.

3. REMOVE ALL BURRS, BREAK SHARP EDGES 0.5 MM MAX.

4. ALL MACHINES SURFACES Ra 3.2 uM.

5. ALL APPLICABLE NAUTILUS STANDARDS AND

SPECIFICATIONS APPLY.

6. ALL DIMENSIONS ARE IN MILLIMETERS

7. ALL DUAL DIMENSIONS ARE IN INCH

UNLESS OTHERWISE SPECIFIED:

METRIC

THIRD ANGLE

PROJECTION

INTERPRET DIMENSIONS AND TOLERANCES
PER ASME Y14.5M - 1994

2.5

1.5

0.75

0.25

1°

X.X

X.XX

X.XXX

ANGULAR

SIZE

This document is the property of Nautilus, Inc. It may not be reproduced in whole or part, provided to third parties, or used for any purposes other than the performance of work for Nautilus, Inc. without written authorization. All rights are reserved, including copyrights.

TOLERANCES.

DRAWN

DESIGNED

DATE

METRIC_C_REV G

NAUTILUS, INC.

16400 SE NAUTILUS DRIVE, VANCOUVER, WA 98683

LIFECYCLE

- -

APPROVALS

- -

WARRANTY ITEM:

D.LOVELY

08 /13 / 2009

D.LOVELY

002-2353

TC PULL IN WARNING

MATERIAL.

COLOR.

DIE LINE

PMS 152

PMS 109

BLACK

WHITE

Labels must be created from an agency approved tamper proof labeling system

such as "UL Recognized component marking and labeling system (example: UL PGGU2) or equivalent.

Label and adhesive must be rated for surface it is applied to (painted metal or ABS plastic),

Label and adhesive must be rated for 60 degrees C minimum. Labels must meet UL 1647 Permanence of Marking Test.

DRAWING RELEASE

CHANGED SIZE

8/17/09

12745

12247

DLOVELY

120mm

30.5mm

-Moving parts can crush and
cut.
-Keep guards in place.
-Lock out power before
servicing.

REVISIONS

ECO

REVISION

REV DESCRIPTION

APPROVED

DATE

TITLE.

PART NO.

REV.

SHEET 1 OF 1

SCALE: 1:1

DO NOT SCALE DRAWING

1. ALL ITEMS MUST BE RoHS COMPLIANT

2. ALL DIMENSIONS APPLY BEFORE PLATING OR COATING.

3. REMOVE ALL BURRS, BREAK SHARP EDGES 0.5 MM MAX.

4. ALL MACHINES SURFACES Ra 3.2 uM.

5. ALL APPLICABLE NAUTILUS STANDARDS AND

SPECIFICATIONS APPLY.

6. ALL DIMENSIONS ARE IN MILLIMETERS

7. ALL DUAL DIMENSIONS ARE IN INCH

UNLESS OTHERWISE SPECIFIED:

METRIC

THIRD ANGLE

PROJECTION

INTERPRET DIMENSIONS AND TOLERANCES
PER ASME Y14.5M - 1994

2.5

1.5

0.75

0.25

1°

X.X

X.XX

X.XXX

ANGULAR

SIZE

TOLERANCES.

DRAWN

DESIGNED

DATE

METRIC_C_REV G

NAUTILUS, INC.

16400 SE NAUTILUS DRIVE, VANCOUVER, WA 98683

LIFECYCLE

- -

APPROVALS

- -

WARRANTY ITEM:

D.LOVELY

08 /17 / 2009

D.LOVELY

002-2354

TC SHOCK WARNING

MATERIAL.

COLOR.

DIE LINE

PMS 152

PMS 109

BLACK

WHITE

Labels must be created from an agency approved tamper proof labeling system

such as "UL Recognized component marking and labeling system (example: UL PGGU2) or equivalent.

Label and adhesive must be rated for surface it is applied to (painted metal or ABS plastic),

Label and adhesive must be rated for 60 degrees C minimum. Labels must meet UL 1647 Permanence of Marking Test.

72mm

30.5mm

DRAWING RELEASE

CHANGED SIZE

8/17/09

12745

12247

DLOVELY

(The label

is only available on the BXT8J

in English and French

Canadian.)

WARNING!

Keep young children away from this

machine at all times. Contact with the

moving surface may result in severe

friction burns.

(This label is only available on the BXT8Ji

machine in English.)

(These labels are only

available in English and

French Canadian.)

Summary of Contents for BXT8J






















































































































































Search results

Summary of Contents for BXT8J

Reviews:

Related manuals for BXT8J

Brands by name

Popular brands

Bowflex BXT8J, Service Manual

Search results

Summary of Contents for BXT8J

Reviews:

Related manuals for BXT8J

Brands by name

Popular brands