4
Adjusting Length
Loosen the tube clamping nut 1/4 turn
Extend tube assembly
1.
Grasp the top tube with one hand.
2.
Grasp the search coil with the other hand.
3.
Pull two sections apart to slide the bottom tube out of the top
tube.
Establish Tube Length
1.
Pivot the search coil perpendicular to the tube.
2.
Place detector in user’s hand, with arm extended.
3.
Adjust tube length so that search coil rests on the ground, close
to the user’s feet.
4.
Align the coil to the detector body.
5.
Tighten the tube clamping nut, while
holding the search coil in place on
the ground to prevent twisting of
the tube assembly while tightening.