Connect to Host 9
Comm Protocol
The adapter’s communication protocol could be set to None,
Xon/Xoff, DTR/DSR, or Both. This setting should match the
terminal’s communication protocol setting for the EIA port or
else the terminal could lose data. If the communication
protocol is set to
None
, the terminal could lose data.
Recall Saved Setting
Selecting option number
7
from the Setup Menu sets the values
of options 1 through 5 to that currently stored in NVRAM.
Message
Recall complete
indicates a successful recall.
Save Settings for Powerup
When all of the terminal’s Ethernet settings are acceptable,
select option number
8
from the Setup Menu to save the
displayed values in NVRAM.
Exit Setup Menu
When satisfied with all of the terminal’s Ethernet settings,
press
9
to return to the Main Menu.
- MAIN MENU -
Status > Disconnected from Host
Host IP Address > XXX.XXX.XXX.XXX
1. Setup Menu
2. Connect to Host
3. Ping
4. Hardware Information
--------------------------
9. Exit Main Menu
Connect to Host
Once all the necessary addresses have been established, the
terminal is ready to initiate a Telnet connection to the selected