Configuring the Ethernet Interface 7
- SETUP MENU -
1. Edit Host IP addr
175.55.172.90
2. Edit Local IP addr
0.0.0.0
3. Edit Subnet Mask
0.0.0.0
4. Edit Default Gateway
0.0.0.0
5. Poweron Connect (Toggle) = No
6. Comm Protocol (Toggle) = Both
------------------------
7. Recall Saved Settings
8. Save Settings for Powerup
9. Return to Main Menu
If an invalid address is entered, the terminal responds with an
error message and prompts the user for the address again. For
example:
Enter Host IP address >
175.55.
↵
↵
Invalid entry: Format ###.###.###.###
Enter Your Choice: Host IP address >
Edit Local IP Address
To define your terminal IP address, select option number 2.
When prompted, enter the terminal’s IP address in dotted-
decimal format as shown in the example below:
Enter Host IP address >
204.172.55.121
↵
↵
If a valid address is entered, the terminal stores it in its
working memory and returns to the Setup Menu with the
Edit
Local IP Addr
field updated.
If an invalid address is entered, the terminal responds with an
error message and prompts the user for the address again.
