Boundless ADDS 5300 User Manual Download Page 14

Page: 14 / 120

____________________________
ADDS 5300 Win CE

Before you use the CE6.0…

1. Get the device and Boot loader ready

2. The differences between CE5.0and CE6.0

Only one user interface style supported

a. The

CE6.0

does not

provide

WBT Mode

because the

Desktop Mode

is more popular.

b. CE6.0 does not provide

Setup Wizard

because the Desktop Mode is easier to use than use Setup Wizard.

More device drivers have been supported in CE6.0

More complete and user friendly interface have been supported in CE6.0

a. Hot

Key

supported

The CE6.0 adds more Hot Keys supported than CE5.0, etc, F12 (user mode switching),

ALT+F2 (Control Panel), ALT+S (Shutdown).

Background & Appearance change

User can change the background from files, or set another kind of appearance he wants.

USB storage Data Editor

CE6.0 supports USB Storage device read/write function in Start Menu//Programs//My USB Storage Device.

d. USB

Manager

USB Manager provides the user to set the USB storage device read/write access control.

e. System

Info

System Info v1.0 adds a new page called Component that lists the version of each component,

And the General page adds an item display the firmware name.

User Access and Security Control

a. Administrator/User Mode switch

The function supports the user mode switching to provide two modes for user to set
Their security controlled and access controlled.

b. User Security Control

User Security Control is an important and new function; it provides the system manager to

Set the access control of this thin client for user mode or administrator mode,
It makes the thin client more complete and safe in personal security.

Add/Remove Component

a. Add/Remove is a new function; it supports the user to install the application or driver he wants to use,

And user also can uninstall them by using the application.

Image Update/Back-up

a. The CE5.0 OS could be upgraded to CE6.0 by using

FTP Update

b. The CE6.0 has only been installed to

TK-3550

TK-3750

TK-3770

and

TK-5770

FTP Update v3.0 supports more kinds of data to update, user can update

BIOS/firmware/logo/registry/boot

loader/company information

by it,

d. FTP Update v3.0 supports files

Back-up

function, user can clone these kinds of file from client to server.

Summary of Contents for ADDS 5300

























































































































Search results

Summary of Contents for ADDS 5300

Reviews:

Related manuals for ADDS 5300

Brands by name

Popular brands

Boundless ADDS 5300, User Manual

Search results

Summary of Contents for ADDS 5300

Reviews:

Related manuals for ADDS 5300

Brands by name

Popular brands