____________________________
ADDS 5300 Win CE
113
b. Log on Screen At Power On
If users enable this option, the
Log on Screen
of the WBT will pop up to ask for password of the Mode that users attempt to
log on. The Log on Screen is as below:
When users enter the correct passwords for the operation mode that they attempt to log on, the WBT will start with the
operation mode they selected.
Note 1.
If users had enabled the option “
Display owner identification
” or “
Display owner notes at power on
” of the
Control Panel Component - Owner, the Log on Screen will show the information kept in Owner. The Log on
Screen is as below:
c. Boot up windows CE in Administrator Mode
When the WBT boots up, the WBT will automatically switch the operation mode to Administrator mode with enabling this
option.
d. Enable
TKDiag
The Self-Test program will run on next booting up of the WBT automatically when this option is enable.
e. Shut down WBT after disconnecting all connections
When this option is enable, the WBT will automatically shut down after all connections disconnect. One can image that users
could use the WBT like a pc. When users log off from the servers, the WBT will automatically shut down and they do not need
to shut down the WBT by themselves. This option will make that using a WBT is as well as a PC.
f.
Enable Session Switch Hotkey Alt + Tab
In default, the Session Switch Program trigged by Hotkey Alt+Tab is disable. When this option is enable, pressing hotkey
Alt+Tab will pop up the Session Switch Program as well as the one provided by windows XP.
