Page 36
37355-0-0217
DECORATIVE GLASS INSTALLATION
WARNING
Failure to position the parts in accordance with the diagrams
and instructions below or failure to use only parts specifically
approved for use with this fireplace may result in property
damage or personal injury.
NOTICE:
During setup the burner may be operated with or
without the Decorative accessory options.
NOTICE:
VFLL60SP will accept 4 square feet of Decorative Glass.
DECORATIVE GLASS AND ROCKS
ACCESSORY PLACEMENT
WARNING
Crushed glass must not be more than a single layer. Do
not use more glass than recommended. Using excess glass
may cause injury or property damage.
WARNING
Use only decorative rocks and glass designed for use in
a fireplace. Using other materials may cause a situation
where injury or property damage may occur.
WARNING
Never place media materials on or next to the burner.
The Decorative Glass options are available in various colors and
package sizes. Choose the size appropriate for your fireplace.
See list on page 9.
CAUTION
To prevent injury, use gloves and eye protection while
applying the decorative glass or droplets.
Application of the Decorative Glass or Rocks should only be
performed after the burner has been fully installed, secured and
tested for leaks.
1. Apply the crushed glass to the shaded area only.
See Figure
63.
Use enough to cover the area of the fireplace, but do not
allow the media to reach higher than the flange surrounding
the burner. Never place decorative media inside the flange
surrounding the burner itself.
This fireplace uses crushed glass. Accent glass droplets
(1/2 inch) or glass drops (1 inch), and ceramic fiber rocks and
pebbles may be added. Mix colors and glass types, but do
not exceed the recommended amount of decorative media.
CAUTION
Glass or rocks must not be placed around the ends or over
the front edge of the burner assembly. Do not restrict air flow.
Figure 63
QUANTITY OF GLASS
Model
Amount
VFLL60SP
4 square feet
