Network Light
The Network Light is single color blue LED. When the XRD is installed with the supplied case,
the Network Light is denoted by a “Radio Tower” symbol.
The network light is used to denote 2 things
● Is the XRD ready to receive messages for the autopilot from the network
● Is the XRD actually receiving messages for the autopilot from the network
When the XRD is initializing, the Network Light may turn on and off several times. Once the
system is initialized, the following table summarizes the various states of the Network Light, and
their interpretations.
Network Light
Color
Blinking
XRD State
Not illuminated
No
Not ready to receive messages
Blue
Yes
Ready & receiving messages
No
Ready but not receiving messages
Power Light
The Power Light is a single color green LED. When the XRD is installed with the supplied case,
the Power Light is denoted by a raised “Power Button” symbol.
The Botlink XRD Power Light is always illuminated when the system is powered on.
XRD Vanilla status light diagnostic codes
The Botlink XRD Vanilla is identified by a green silicon board with 3 upward mounted USB ports
on the long edge of the board.
After upgrading to Botlink XRD software version 3.1.2 or higher, the following diagnostic codes
are available.
Status Light State
Interpretation
Solid light
Installation was successful
21
