Botlink XRD, Manual

Page: 9 / 24

Getting Started
Getting started with the Botlink XRD is quick and easy. You’ll only need a computer with an
internet connection to create a Botlink account, register your XRD, and install some software,
and a work area with a flat surface that you use to install the Botlink XRD hardware on your
drone.
1 Install the Botlink Relay software
The first step to using your Botlink XRD is installing the Botlink Relay software. The Botlink
Relay software enables you to connect your ground control station to your Botlink
XRD-equipped drone without any modifications. The Botlink Relay software is available for Mac
and PC.
Download links are listed below.
OS Version Link
Windows 32 Bit https://botlink-relay-artifacts.s3.us-east-2.amazonaws.com/archive/B
otlink-Relay-win32-ia32-v1-4-0-beta-2.zip
64 Bit https://botlink-relay-artifacts.s3.us-east-2.amazonaws.com/archive/B
otlink-Relay-win32-x64-v1-4-0-beta-2.zip
Mac 64 Bit https://botlink-relay-artifacts.s3.us-east-2.amazonaws.com/archive/B
otlink-Relay-darwin-x64-v1-4-0-beta-2.zip
2 Register your Botlink XRD
Once the Botlink Relay software is installed, you’re ready to register your Botlink XRD to your
account. To register your XRD, you’ll need to know the Hardware ID of your unit. This should
have been provided to you as part of your order documentation. If it wasn’t, or you can’t find the
information, see the “
​
Determining the XRD Hardware ID
​
” section below.
To register your Botlink XRD
1. Open the Botlink XRD Tray App
2. Enter your username and password
3. Click “Login”
4. Switch to the tab
8