1
2
5
8
3
6
9
4
7
10
GETTING STARTED
C
INFLATING YOUR BALANCE TRAINER
1. Find the dual-action hand pump that came with
your Balance Trainer and remove it from its
wrapping.
(See.Fig..A)
2. Place your Balance Trainer at a 45º.with.the.
platform.side.up.
(See.Fig..B)
3. Insert the dual-action hand pump nozzle firmly
into the valve housing and inflate to a height of
about 8.5.inches.
(See.Fig..B)
..
DO.NOT.exceed.10.inches.
TIP.1: To judge proper inflation, simply hold a ruler vertically
against the side of the Balance Trainer and inflate until
the platform clears approximately 8.5 inches high on the
ruler with dome side down and a maximum of 10 inches
high with dome side up.
(See.Figs..C1.and.C2).
Caution: Adding too much air will cause the bladder to
separate from the base and rim.
(See.Video.on.Pg.6.for.
Over-Inflation.if.that.happens.)
4. Once you have inflated your Balance Trainer to the
proper height, firmly.insert.the.plug into the valve
inlet.
5. Before each use, visually inspect the equipment..
Never.use.the.equipment.if.parts.are.missing.or.if.
the.equipment.is.not.functioning.properly.
How to Inflate your Balance Trainer
FIG..C1
8.5.INCHES.HIGH.
WITH.DOME.SIDE.DOWN
FIG..A
FIG..C2
MAXIMUM.10.INCHES.HIGH.
WITH.DOME.SIDE.UP
FIG..B
