Boston Whaler 325 Conquest, Owner'S Manual

Page: 48 / 207

2-2
Chapter 2 • General Information
R
325 Conquest
BOSTON WHALER, INC.
325 Conquest
671
B
kW
14
195
0609
5
kg
2312580 (Conquest) 2348563 (Pilothouse)
The information present on the certification plate
does not relieve the operator of responsibility. Use
common sense and sound judgement when placing
equipment and/or passengers in this vessel:
• Do not load to capacity in poor weather or
rough water.
• The number of seats does not indicate how
many people a boat can carry in poor weather
and rough water.
• Above idle speed, all passengers should be
seated on the seats provided.
Certification Plates
An NMMA Certification means that your Boston
Whaler has been verified by the National Marine
Manufacturers Association (NMMA) to be in
compliance with applicable federal regulations
and American Boat and Yacht Council (ABYC)
standards.
A
Canada Compliance Notice
means that your
Boston Whaler has been certified to comply with
construction standards for small vessels by Transport
Canada.
A
CE mark means that your Boston Whaler has
been certified with the applicable International
Organization for Standardization directives.
An
Australian Builder’s Plate means that your
Boston Whaler has been certified to comply with
safety standards set by the National Marine Safety
Committee.
!
DANGER
Never carry more weight or passengers than
indicated for this vessel, regardless of the
weather or water conditions.
Certification Plates
Figure 2.2.1
NMMA PLATE
CANADA CONFORMITY PLATE
CE MARK (INT’L) BUILDER’S PLATE
AUSTRALIAN BUILDER’S PLATE
1
2
3
1
2
3
4
4
AUSTRALIAN BUILDERS PLATE
MANUFACTURER:
MODEL:
INFORMATION DETERMINED:
MAX OUTBOARD:
MAX PERSONS:
MAX LOAD:
BOUYANCY:
BOSTON WHALER, INC. - USA
325 CONQUEST
ISO STANDARDS
1955 kg
14 = 1050 k g
! WARNING
ALTERATION OF THE BOAT’S HULL OR PERMANENT FITTINGS
MAY INVALIDATE THE PARTICULARS ON THIS PLATE
900 kw; 671 kg
LEVEL
2312578 (Conquest) 2348564 (Pilothouse)
CANADIAN COMPLIANCE NOTICE
AVIS DE CONFORMITÉ
CANADIEN
BOSTON WHALER (BWC)
EDGEWATER, FL, USA
MODEL / MODÈLE:
DESIGN CATEGORY
THE MANUFACTURER DECLARES THAT THIS PRODUCT COMPLIES WITH THE
PLEASURE CRAFT CONSTRUCTION REQUIREMENTS OF THE SMALL VESSEL
REGULATIONS AS THEY READ ON THE DAY ON WHICH THE CONSTRUCTION OF
THE VESSEL WAS STARTED OR ON THE DAY ON WHICH THE VESSEL WAS
IMPORTED.
LE FABRICANT ATTESTE QUE CE BÂTIMENT EST CONFORME AUX EXIGENCES
DE CONSTRUCTION DES EMBARCATIONS DE PLAISANCE DU
RÈGLEMENT SUR
LES PETITS BÂTIMENTS, EN VIGUEUR À LA DATE DU DÉBUT DE SA
CONSTRUCTION OU À LA DATE DE SON IMPORTATION.
B
325 CONQUEST
2312605 (Conquest) 2348565 (Pilothouse)
YACHT CERTIFICATION
DESIGN COMPLIANCE WITH NMMA REQUIREMENTS IN EFFECT
ON THE DATE OF CERTIFICATION IS VERIFIED. MANUFACTURER
RESPONSIBLE FOR PRODUCTION CONTROL
NATIONAL MARINE MANUFACTURERS ASSOCIATION
THIS BOAT COMPLIES WITH U.S. COAST GUARD SAFETY
STANDARDS IN EFFECT ON THE DATE OF CERTIFICATION
BOSTON WHALER, INC.
0125062