Boston Whaler 325 Conquest, Owner'S Manual, Page: 47 / 207

2-1
Chapter 2 • General Information
R
325 Conquest
All boats must comply with federal regulations
regarding maximum capacities. The specifications
and dimensions table, listed later in this chapter,
indicates the maximum weight, number of persons,
and maximum horsepower this vessel is rated to
handle. Do not exceed these specifications.
Manufacturer’s Certification
Boston Whaler
®
is dedicated to creating a superior
product which provides comfort, performance, safety,
and reliability. All of our boats comply with United
States Coast Guard safety standards and are designed,
engineered, and manufactured in accordance with
applicable recommendations and guidelines from
the American Boat and Yacht Council (ABYC) and
certified by the National Marine Manufacturers
Association (NMMA).
Construction Standards
Hull Construction
Boston Whaler hulls are constructed with our
patented unibond-construction process (see Figure
2.1.1). This involves foam injection into a closed-
mold system where the foam expands to fill all voids
in the hull. When the finished product is pulled from
the mold, the hull and deck are chemically bonded
to form a solid, inseparable unit.
Hull Identification Number
The hull identification number is located on the
starboard side of the transom (see Figure 2.1.2).
This is the most important identifying factor on
your vessel followed by the engine serial numbers.
Be sure to reference these when contacting us about
your vessel or engine.
When your boat requires service or maintenance
work it should be taken to an authorized Boston
Whaler dealer. To find a dealer in your area call
800-942-5379 (domestic/international).
In the unlikely event that a problem is not handled
to your satisfaction, discuss any warranty related
problems directly with the service manager of the
dealership or your sales person. Give the dealership
an opportunity to help the service department resolve
the matter for you.
Vessel Servicing
2
3
NO AIR VOIDS
HIGH DENSITY, CLOSED-CELL FOAM
HIGH QUALITY RESINS AND GELCOATS
GLASS MATTING
Hull Construction
Figure 2.1.1
1
4
1
2
3
4
Record your boat’s HIN number here:
Hull Identification Number (HIN)
Figure 2.1.2