background image

3

of the room.  This is accomplished by mounting the speaker so that the diffuse side of the arrow on

the back of the speaker is aimed toward the bulk of the listening area.  If you prefer the surround

effects to be more discreet and localized, then you should mount the speakers so that the direct side

of the arrow on the back of the speaker is aimed toward the bulk of the listening area.  In either case,

the best results will be obtained if the VR-MX is mounted above ear level and out at least 20 inches

from the corner.  However, it has been our experience that satisfactory results can be obtained with a

wide variety of placement choices. 

Direct Configuration

Diffuse Configuration

The VR-MX can be placed on the side or back walls, as well as hung from the ceiling.  Recommended

placement is above ear level on the side walls opposite the primary listening position, ideally 20

inches or more out from the back wall.  However, experimentation will yield the best possible results

for every room.  If possible, permanent mounting of the VR-MX should only be done after the

optimum location is determined. 

In general, surround speakers are either directional or diffuse.  Directional surround speakers provide

a high degree of localization, and are considered best for music.  Diffuse surround speakers are

difficult to localize, and are considered best for movies.  The VR-MX can be used in either manner.

The VR-MX surround speaker is shipped in mirror-image pairs.  Refer to the label on the back of the

VR-MX to assist you in placing the speakers for the desired result (see the label picture on page 5).

After mounting the wall brackets, experimentation between direct and diffused patterns can be

easily achieved simply by swapping the right and left speakers.

MOUNTING TIPS:  

Use the supplied template to aid in positioning the mounting bracket.  At least 4

inches of clearance is required between the top of the template and the ceiling.  Please take care

that the mounting brackets are attached securely to the chosen surface.  Toggle bolts are supplied

for use on drywall or hollow plaster walls.  Alternatively, you may wish to obtain wood screws for

wood or wall studs, molly bolts or screw anchors for drywall or plaster walls, or masonry anchors for

masonry walls.  You can also just place the speakers to sit upright on a shelf or other flat surface.  In

this case, be sure to use the supplied self-adhesive rubber feet to prevent any possible slippage.

D

i

f

fu

s

e

Di

rec

t

D

if

fu

se

Dire

ct

VRMX  Manual    2/9/01    12:16  PM    Page  3

Summary of Contents for VR-MX









Reviews: