IMPORTANT:
Your speakers have been
packed as a DIRECT or DIFFUSE matched
set. Make sure that each speaker is mounted
on the desired side, with the active bass driver
(smaller dust cap) pointing to the listening
area for a DIRECT sound field or the passive bass
driver (larger dust cap) pointing to the listening area for a DIFFUSE sound field. The end result is that
the DIRECT and DIFFUSE arrows on the back of each speaker will be pointing in the same direction
on either side of the room.
5
If the viewing area is in a corner, the speakers
may be placed to either side on adjacent
walls.
Connecting Your VR-MX Speakers
Connect the speaker’s terminals to those on the amplifier or receiver designated for “surround” or
“rear channel effects.” Maintain consistency of the
+
(red) and
–
(black) connections by using the
markings on the wire. Connect the ribbed side to the
+
(red) terminals and the smooth side to the
–
(black) terminals.
WARNING:
To prevent electrical shock, always switch off the amplifier or
receiver when making connections to the speaker.
Using the five-way binding posts:
The binding posts permit easy
connection to pins, spade lugs, bare wire and cable banana plugs.
The metal surfaces are plated with 24K gold to resist corrosion.
NOTE: Most dual banana plugs will not fit behind a flush wall mount
installation, however single wire banana plugs should fit.
Boston Acoustics, Inc. Peabody, MA 01960
Made in USA
VR-MX
8 ohms
PZ 000101 A
DIFFUSE
SOUND RADIATION
DIRECT
DIFFUSE
Consult manual for orientation best
suited to your listening
environment.
Wide Dispersion Surround Speaker
For
DIRECT
Radiating
Position VR-MX
with
DIRECT
arrow facing the
listening area.
For
DIFFUSE
Field
Surround Effects:
Position VR-MX
with
DIFFUSE
arrow facing the
listening area.
Surround Effects:
Boston Acoustics, Inc. Peabody, MA 01960
Made in USA
VR-MX
8 ohms
PZ 000101 B
DIFFUSE
SOUND RADIATION
DIFFUSE
DIRECT
Consult manual for orientation best
suited to your listening
environment.
Wide Dispersion Surround Speaker
For
DIFFUSE
Field
Position VR-MX
with
DIFFUSE
arrow facing the
listening area.
For
DIRECT
Radiating
Surround Effects:
Position VR-MX
with
DIRECT
arrow facing the
listening area.
Surround Effects:
SOUND RADIATION
ORIENTATION LABELS
These labels are located on
the rear of each VR-MX.
Note that the speakers are
configured as mirror
imaged pairs.
VRMX Manual 2/9/01 12:16 PM Page 5
