7
Listening Levels and
Power Handling
IMPORTANT:
Adjusting Listening Volume. To obtain the best home theater effect, balance the
sound level of each speaker. Home theater systems contain a test signal that simplifies this
procedure. Refer to the instructions provided with your surround sound electronics.
The power recommendation for the speaker assumes the amplifier is not overdriven, which, over a
long period, can damage even our rugged speakers. If you hear a harsh, gritty noise on peak levels,
turn down the volume control. Prolonged or repeated operation with a distorted signal from the
amplifier can cause damage to the speakers, which is not covered by the warranty.
Drill
1
⁄
2
" (12mm) holes
toggle wings
Level bracket
before hanging
speaker
6-32 x 2"
machine screws
2. Drill all holes as indicated. Insert the
machine screws through the bracket and
thread them onto the toggle wings before
penetrating the wall. Push the toggle
wings through the holes in the wall.
3. Level the bracket and tighten the screws.
Connect the wires to the terminals and hang
the speaker on the brackets, so the DIRECT
or DIFFUSE arrow on the label points to the
front of the home theater area according to
your preference (see page 3).
VRMX Manual 2/9/01 12:16 PM Page 7
