BossWeld X Series Page 41 Manual Download

Page: 41 / 52

MIG TORCH SET

Note:

Pictures may vary from your machine model

Attach the Euro Connect MIG torch to the

machine feeding the wire into the liner.

Tighten MIG Torch conanector to machine.

Remove nozzle (A) and tip (B) from torch.

Trim wire to the end of the nozzle.

Press the trigger. This will feed the wire

through the torch. Release button when

wire appears at the end of the torch.

Re install tip over the wire and tighten

using the tool supplied, Do NOT over

tighten, or you may damage the tip holder

and re-attach nozzle to torch.

Plug machine into 240V and switch to the

ON position on the back of machine.

PART No:

DESCRIPTION

Knurled Drive Roller For Gasless Wire

RK302210.08.10

Drive Roller 0.8/1.0mm Knurled 30 x 22 x 10mm

RK302210.09.12

Drive Roller 0.9/1.2mm Knurled 30 x 22 x 10mm

RK302210.10.12

Drive Roller 1.0/1.2mm Knurled 30 x 22 x 10mm

U Grooved Drive Roller For Aluminium Wire

RU302210.06.08

Drive Roller 0.6/0.8mm U Groove 30 x 22 x 10mm

RU302210.08.09

Drive Roller 0.8/0.9mm U Groove 30 x 22 x 10mm

RU302210.08.10

Drive Roller 0.8/1.0mm U Groove 30 x 22 x 10mm

RU302210.09.12

Drive Roller 0.9/1.2mm U Groove 30 x 22 x 10mm

V Grooved Drive Roller For Solid Wire

RV302210.06.08

Drive Roller 0.6/0.8mm V Groove 30 x 22 x 10mm

RV302210.08.10

Drive Roller 0.8/1.0mm V Groove 30 x 22 x 10mm

RV302210.09.12

Drive Roller 0.9/1.2mm V Groove 30 x 22 x 10mm

RV302210.10.12

Drive Roller 1.0/1.2mm V Groove 30 x 22 x 10mm

30mm

10mm

MACHINE DRIVE ROLLER SIZE GUIDE (NOTE: MACHINE WILL RUN UP TO 1.2MM WIRE)

Summary of Contents for X Series





















































Search results

Summary of Contents for X Series

Reviews:

Related manuals for X Series

Brands by name

Popular brands

BossWeld X Series, Manual

Search results

Summary of Contents for X Series

Reviews:

Related manuals for X Series

Brands by name

Popular brands