BossWeld TREO 175, User Manual

Page: 12 / 32

12
PANEL FUNCTION ILLUSTRATION
Front panel instruction
1. STICK/LIFT TIG/MIG switch key
2. WIRE Check/Inch
3. VRD/2T/4Tswitch key
4. Data selection key (effective under MIG mode)
5. Multifunctional data adjusting knob (coarse adjustment by pressing the knob and turning it: big
regulation rate and high speed; fine adjustment only by turning the knob: small regulation rate and
low speed)
6. Multifunctional data display
Polarity conversion joint
•
This machine has the polarity conversion
•
There are positive output terminal and negative output terminal between wire feeder and wire
spool.
•
When use solid wire with gas protection, the torch socket should be connected to the positive
output terminal, ground cable should be connected to the negative output terminal.
•
When use flux-cored wire (Gasless), the torch socket should be connected to the negative output
terminal, ground cable should be connected to the positive output terminal.