background image

18

Bossweld Universal Welders Trolley

Multi purpose welder trolley that suits most Bossweld welding machines.

Features

• 45kg capacity
• 3 storage levels
• Sturdy formed steel construction
• Cylinder holder accepts D and E size gas cylinders and comes with 2 safety chains
• Large 7.5cm casters for easy movement
• Welders sits at an angle for easy access to controls
• Handy cable hangers
• Overall dimension - 70.5cm (L) x 41.9cm (W) x 77.5cm (H)

Bossweld 16inch Welding Gloves

BossSafe 16 inch welding gloves available in black and green cow split leather.

Bossweld Shade 5 Gas Welding Flip Up Goggles

Lightweight goggles used for oxygen/acetylene and oxygen/LPG cutting and brazing. 
Can also be used during plasma cutting process.

• Flip up lens
• Elastic head strap
• Comfortable fit to face
• Complete with shade 5 lens

Bossweld Gas Welding Flip-Up Goggles

Lightweight goggle used for Oxy/Acetylene and Oxy/LPG cutting and brazing

Features

• Light weight
• Flip up lenses
• Comfortable fit to face
• Elastic head straps

Applications

• Eye protection during Oxy/Acetylene and Oxy/LPG cutting and brazing
• Plasma cutting

CODE

DESCRIPTION

600311

Bossweld Welder Trolley Universal

CODE

DESCRIPTION

700010

Bossweld 16”” Black & Gold Welding Glove

CODE

DESCRIPTION

700056

Bossweld Gas Welding Flip-up Goggles Shade 5

CODE

DESCRIPTION

700055

Bossweld Gas Welding Flip-up Goggles Shade 5

MACHINE CONSUMABLE OPTIONS

Bossweld Engineers Chalk

High quality soapstone engineers chalk used for marking steel in general engineering 
& boilermaking.

Features

• 75mm long
• 10 x 5mm or 10 x 10mm
• Semi permanent marking of steels

CODE

DESCRIPTION

800020

Bossweld Engineers Chalk 75 x 10 x 10mm

800022

Bossweld Engineers Split Chalk 75 x 10 x 5 mm

Summary of Contents for P40





















Reviews: