Current State
On this page user can gather information of each commonly-used parameter of the phone,
it is shown as the following figure: the network section shows the current WAN, LAN
configurations of the phone: including gaining way of WAN IP and IP (static state, DHCP,
PPPoE), MAC address, WAN IP address of the phone, LAN IP address of the phone
opening state of LAN DHCP server.
The VoIP section shows the current default signalling protocol in use, and server
parameter in use of each protocol: including GateKeeper IP of H323, H323ID, whether
enables register, whether has registered on GK;
Register server IP of SIP, proxy server IP, whether enables register, whether has registered
on register server, whether enables outbound proxy, whether enables STUN server;
The Phone Number section shows corresponding phone number of each protocol;
The version number and date of issue have been shown at the end of the page;
，
Every time you press a key, your handset acknowledges it with a key tone. You can set
your handset with a key tone or to diable the key tone for a silent use.
1. Press the
button.
2. Press the
or
button to choose
, then press the
button.
3. Press the
or
button to scroll through the key tone options.
4. Press the
button to save the selection.
Result:
The display shows the current setting.
Result:
You can choose from:
- Standard key tone.
- Two frequency tone.
- The key tone does not sound.
Key Beep
MENU
You can select your own ringing sound. 6 ring types are available.
1. Press the
button.
3. Press the
button to access
.
2. Press the
or
button to choose
, then press the
button.
4. Press the
or
button to choose the ring type you want.
5. Press the
button to save the selection.
Result:
Each time you press the
button or
button, the handset sounds the ring you have
chosen.
Selecting Ring Type
MENU
21
34
