Configure port of SIP STUN;
STUN can support SIP terminal's penetration to NAT in the inner-net. In this way, as long
as there is conventional SIP proxy and a STUN server placed in the public net, it will do;
but STUN only supports three NAT modes: FULL CONE, restricted, port restricted;
Public backup server configuration the specific configuration parameter has the same
meaning with public server. It should be noted that the username and password should be
the same with the public main server;
；
Private server configuration, specific configuration parameter has the same meaning with
public server;
Interval time for STUN's detection on NAT type, the
unit is minute;
Configure enable/disable SIP STUN;
Configure permit/deny private server register;
Configure enable/disable private
;
If user has accounts of a certain SIP server and each account has different password,
then user should add each account and its corresponding password to the account&
password table.
outbound proxy
Receiving a Call
When a call is received, the phone rings and the
icon on the display blinks.
If the caller can be identified, the caller's phone number is displayed. If the caller cannot
be identified, only the
icon blinks.
1. To answer the call, press any button.
Or
If the handset is on the base, just simply lift it up. You do not need to press any
button.
2. You can speak. To end the call, either press the
button or replace the handset
on the base.
Result:
The phone is connected and the
icon is steadily on. The LCD window displays the talk
time.
After you lift the phone from the base to receive the call, the
button does not work for 3
seconds to prevent the phone from being disengaged.
Note:
You can temporarily switch your phone's microphone off, so that the other party cannot
hear you.
Example: You wish to say something to another person in the room but do not want the
other party to hear you.
To switch the microphone off temporarily, press the
button while you are on the phone.
The
icon appears in the LCD window. Your correspondent can no longer hear you.
To switch the microphone back on, press the
button again.
Switching the Microphone Off (Mute)
2615042
Blinks
Caller's
number
INT
INT
10
45
