Rep: xxx, n bit in the front part of the number will be replaced. N is decided by the
replacing length. For example, user want to dial PSTN (010-62281493) by VoIP's voice
over service, while actually the called number should be 8610-62281493, then we can
configure called number as 010T, then rep: 8610, and then set the replacing length as 3.
So that when user make a call with 010 prefix, the number will be replaced as 8610 plus
the number and then sent out. It is a convenient thinking mode for user to make a call;
Delete selective number IP image;
If user want to modify a certain current number image, first select in
the drop-down menu and then load the image parameter of the said number, click modify
to make modification; of which:
this is the modified number. read-only;
To modify call mode;
To modify destination address; this is optional configuration item;
To modify destination phone port this is optional
configuration item;
To modify alias; this is optional configuration item;
To modify suffix; this is optional configuration item;
To modify replacing length (if rep and del of alias have
been configured);
Click submit to go into effect; click return to cancel configuration and
return.
The basic application of the number IP table has been introduced now let me introduce
how to configure IP table of number to implement configuration of using multi-accounts
concurrently:
For example, now user has a H323 account and two SIP accounts, then under the default
condition, user can only make calls by the default protocol. Configure the number IP table
to select the call protocol, then user don't need to select default protocol before making
calls every time.
The configuration process will not be repeated, now I will mainly introduce what kind of
number IP image can implement this function. By configuration image table as follows
will be gained:
，
，
Connecting Lines
Connect one end of the phone line cord to
the phone line jack on the bottom of the
base, and the other end to a standard
phone wall outlet.
Connect the modular end of the AC power
adapter to the power jack of the base,
then plug the AC adapter into a standard
AC wall outlet.
Installing Batteries
Slide the battery cover in the direction of the arrow and pull it out.
Insert new batteries as indicated, matching correct polarity (+, -).
To replace the battery cover, slide the cover up until it snaps shut.
Note:
Reversing the orientation may damage the handset.
The rechargeable Ni-MH batteries (AAA size ) come with your phone. Install the batteries
before using your phone.
1.
2.
1.
2.
3.
To AC wall outlet
To phone wall jack
The batteries need to be replaced if they do not recover their full storage capacities after
recharging.
When replacing the batteries, always use good quality Ni-MH re-chargeable batteries. Never use
other batteries or conventional alkaline batteries.
Notes:
4
51
