enclosed network cables to connect IP CAMERA to Internet, via router or switch. Please
prepare the router and switch by yourself.
2.2 HARDWARE INSTALLATION
This part is for introducing how to finish hardware installation and physical connection
of IP CAMERA. After it, please connect power supply, IP CAMERA will start work and the
indicator light will shine.
1
.
Install the IP Camera at the place where monitoring required.
2
.
connect network
Connect IP Camera with hub (10
／
100M) or switch (10
／
100M), insert one end of the
network cable into RJ45 port, the other end into router or switch. Indicator light at RJ45
port will flash under normal condition
3
.
connect to the power supply
Pleaser use the enclosed power adapter in package to connect the IP Camera and power
supply, otherwise you will damage the hardware
4
.
check LED light
After connect to the power supply, IP Camera will start work and the small yellow light
at the back of it will shine. In dark condition, you will see the light at the front of camera.
Four infrared lights will be as lamp-house to let you see clear picture in dark.
2.3 SOFTWARE INSTALLATION
Please use the enclosed IPCAMSETUP.EXE software to start initial installation on
your PC. After it, IP Camera Tool will search all IP addresses of IP CAMERA in the same
network space automatically.
1
.
Please use the enclosed driver, then you will see the welcome interface of
installation program.
2
.
Introduction interface of installation will be shown. After read it, press” Next” to
continue installation.
Please refer to Picture 2.4
Summary of Contents for BOSSC158
Page 1: ... 266 USER MANUAL V1 3 ...
