Beo4 NAVI mode option.
Newer Beo4 models are named Beo4 Navi due to an added special navigation button.
A joystick type control button, placed where previous Beo4 models have a
button.
If your Beo4 has a
button, this chapter is
not
relevant for you !
Use of the Beo4 Navi joystick navigation operation:
Enter one of these 2 codes within 10 seconds to enable or disable the BOSSCOM controllers use of the ex-
Set the Beo4 Navi remote control in operation mode 2, as described in the B&O user guide that was sup-
plied with your Beo4, if you want to use these. Otherwise select mode 1.
Enable use of the NAVI control.
When the BOSSCOM controller NAVI mode has been
enabled, use the operation table on page 9.
Disable use of the NAVI control.
When the BOSSCOM controller NAVI mode has been
disabled, use the operation table on page 8.
