The BOSSCOM controller for the Beo4 remote control
The BOSSCOM controller is a small microcomputer module, which is specifically
made to be built in to a Bang & Olufsen Beo4 remote control.
The controller captures the commands that were meant for operating a Bang & Olufsen
device. Before the commands are emitted from the Beo4, these commands are convert-
ed, and therefore also able to operate a non Bang & Olufsen TV.
Each controller is dedicated for operating a specific product like an Apple iPod docking
station, a flat screen TV, a curtain controller etc.
The controller makes the Beo4 able to operate a third part device, still able to operate
any other Bang & Olufsen products.
If there is a Bang & Olufsen audiomaster in the room, it can be used for handling the sound. Speakers con-
nected to an audiomaster are of a much better quality than the speakers in a TV. In a B&O linkroom setup
with Beolink Active or Beolink Passive, you can also use these speakers to improve sound from most TV’s.
Only a simple audio cable is needed between the TV and the audiomaster. See the option programming sec-
tion about AAUX and PC modes on page 11.
