Troubleshooting
Restoring Factory Default Settings Using the Pushbutton Dial:
1. Enter the configuration menu (see
“Entering the Configuration Menu”
on page
2. Rotate the pushbutton dial clockwise or counterclockwise until “RST” is displayed.
3. Press the pushbutton dial. After a short delay, a welcome message will be displayed.
13 Troubleshooting
No Sound when Using Optical or Coaxial SPDIF Audio:
• Ensure that the volume level on the connected device is not set too low or set to zero.
• Ensure that the connected device has audio ouput enabled.
• Ensure that the connected device is set to 2-channel audio, as opposed to multichannel or compressed audio.
• Ensure that the connected device is set to one of the following sample rates: 44.1kHz, 48kHz, 96kHz.
“NOT PCM” Shown on the Display:
• This message is displayed when the Moonraker sound system receives digital audio not in 2-channel PCM format.
28