Boss RC-600, Parameter Manual, Page: 30 / 48

30
System Settings (MENU)
Parameter Value
(Bold: default)
Explanation
TARGET
MIDI CC#01–31
Transmit a control change message of the specified controller number from the MIDI OUT
connector.
MIDI CC#64–127
TARGET MIN
Specifies the variable range of the function (parameter) that is specified as the target.
The value (MIN: minimum value, MAX: maximum value) depends on the parameter that is specified as the target.
TARGET MAX
(*6) When STEREO LINK (p. 9, p. 11) is “ON,” the function set for the L side is enabled.
USB
Parameter Value
(Bold: default)
Explanation
STORAGE
OFF , CONNECT
Change this from the OFF setting when connecting the RC-600 via USB to your computer.
When a connection with the computer is established, the message “CONNECTING...”
appears.
AUDIO
MODE
These are the settings for the USB driver when USB audio is used.
GENERIC
Choose this if you want to use the generic USB driver provided by your computer’s
operating system.
VENDOR
Choose this if you want to use a USB driver downloaded from the BOSS website.
In order to use the RC-600 with the “VENDOR” setting, you must download the driver from
the following URL and install it on your computer.
For details on installation, refer to the following URL.
&
https://www.boss.info/support/
ROUTING
These parameters set the output destination for the audio signal that’s inputted to the USB port of the RC-600 from your
computer.
LINE OUT Outputs the audio signal from the MAIN jacks (L/MONO, R) and PHONES jack (*7).
SUB MIX
Outputs the audio signal from the MAIN jacks (L/MONO, R) and PHONES jack (*7), as well as
the signal from the USB port of the RC-600 to your computer.
LOOP IN The audio signal is input to each track. You can also record this audio.
INPUT LEVEL 0–
100
–200
Sets the output level of the audio signal inputted to the USB port of the RC-600 from your
computer.
OUTPUT LEVEL 0–
100
–200
Sets the output level of the audio signal outputted from the RC-600’s USB port to your
computer.
(*7) Audio is not output from the PHONES jack when PHONES OUT (p. 12) is set to “INDIVIDUAL.”