Boss RC-600, Parameter Manual, Page: 11 / 48

11
System Settings (MENU)
OUTPUT
SETUP
Parameter Value
(Bold: default)
Explanation
OUTPUT KNOB
These parameters select which output levels are adjusted using the [OUTPUT LEVEL] knob.
ALL
Adjusts the MASTER OUT and PHONES OUT.
MASTER Adjusts the general output level (MASTER OUT) for MAIN/SUB 1/SUB 2.
PHONES Adjusts the PHONES output level (PHONES OUT).
OFF
This can’t be adjusted with the [OUTPUT LEVEL] knob.
The output level used is the level adjusted in the MIXER screen (p. 13) for each output jack.
STEREO LINK
MAIN
OFF,
ON
Turns the stereo link function on/off.
When set to “ON,” this collectively uses the same settings for the L and R jacks.
SUB1
SUB2
PREFERENCE
MAIN
SYSTEM ,
MEMORY
Select whether to make the settings for each output jack, for the rhythm sounds (RHYTHM)
and for the MASTER FX settings (MFX) apply to each memory individually or to the system.
* When switching to the settings for each memory, use the write operation to save the
settings to memory.
SUB1
SUB2
PHONES
RHYTHM
MFX
ROUTING
9
TRACK
Parameter Value
(Bold: default)
Explanation
MAIN-L, R (*2) 1–6 OFF, ON
Sets the track to output to MAIN.
Turn the [1] or [2] knob to select the track, and press the [1] or [2] knob to switch between ON/
OFF.
SUB1-L, R (*2)
1–6 OFF, ON
Sets the track to output to SUB 1.
Turn the [3] or [4] knob to select the track, and press the [3] or [4] knob to switch between ON/
OFF.
SUB2-L, R (*2)
1–6
OFF,
ON
Sets the track to output to SUB 2.
Turn the [1] or [2] knob to select the track, and press the [1] or [2] knob to switch between ON/
OFF.
PHONES (*3)
1–6
OFF,
ON
Sets the track to output to PHONES.
Turn the [3] or [4] knob to select the track, and press the [3] or [4] knob to switch between ON/
OFF.
(*2) When STEREO LINK is “ON,” MAIN, SUB 1 and SUB 2 are shown.
(*3) This is shown when the SW parameter of ROUTING/PHONES OUT (p. 12) is set to “INDIVIDUAL.”