Boss RC-600, Parameter Manual, Page: 42 / 48

42
Input FX/Track FX List
MOD DELAY
This is a delay with a pleasant chorus-type effect added to the delay repeats.
Parameter Value
(Bold: default)
Explanation
TIME 1– 200 –2000 ms,
ˇ
–
`
Sets the delay time.
FEEDBACK 1– 16 Sets the number of delay repeats.
MOD DEPTH 0– 50 –100
Sets the modulation depth of the
delay sound.
D.LEVEL 0–
100
Sets the volume of the direct
sound.
LOW CUT
FLAT
, 20.0 Hz–12.5
kHz
Sets the frequency at which the
low cut filter begins to take effect.
When “FLAT” is selected, the low
cut filter will have no effect.
HIGH CUT
20.0 Hz–12.5 kHz,
FLAT
Sets the frequency at which the
high cut filter begins to take effect.
When “FLAT” is selected, the high
cut filter will have no effect.
E.LEVEL 0–
50
–120
Sets the volume of the delay
sound.
TAPE ECHO
A virtual tape echo that produces a realistic tape delay sound.
Parameter Value
(Bold: default)
Explanation
REPEAT RATE 1–
200
–2000 ms,
ˇ
–
`
Sets the tape speed.
INTENSITY 0–
50
–100 Sets the amount of delay repeats.
D.LEVEL 0–
100
Sets the volume of the direct
sound.
LOW CUT
FLAT , 20.0 Hz–12.5
kHz
Sets the frequency at which the
low cut filter begins to take effect.
When “FLAT” is selected, the low
cut filter will have no effect.
HIGH CUT
20.0 Hz–12.5 kHz,
FLAT
Sets the frequency at which the
high cut filter begins to take effect.
When “FLAT” is selected, the high
cut filter will have no effect.
E.LEVEL 0–
50
–120
Sets the volume of the effect
sound.
GRANULAR DELAY
Repeats a short portion of the input sound, giving it a buzzy character or producing
the effect of playing a roll.
Parameter Value
(Bold: default)
Explanation
TIME
0– 50 –100 Sets the spacing of the repeats.
FEEDBACK
0– 70 –100
Sets the length that will be
repeated.
E.LEVEL 0– 50 –100
Sets the volume of the effect
sound.
WARP
Produces a dream-like sound.
Parameter Value
(Bold: default)
Explanation
LEVEL 0– 50 –100
Adjusts the volume of the effect
sound.
TWIST
Produces an aggressive sense of rotation.
Parameter Value
(Bold: default)
Explanation
RELEASE
Selects how the rotation should stop when the effect is
turned off.
FALL
Rotation stops when you switch
to off.
FADE
When you switch to off, fadeout
occurs while continuing the
rotation.
RISE 0– 50 –100
Sets the amount of time it is to
take for the effect to transition to
the maximum.
FALL 0– 50 –100
Sets the time to fade-out when
RELEASE is set to “FADE.”
LEVEL 0–
50
–100
Sets the volume of the effect
sound.
ROLL
This loops the input sound over a short cycle, splitting the length.
Parameter Value
(Bold: default)
Explanation
TIME 1–1000 ms,
ˇ
–
¸
–
`
Sets the loop rate.
REPEAT 1– 60 –100, INF
Sets the number of repetitions for
ROLL when ROLL is “OFF.”
ROLL OFF, 1/2, 1/4, 1/8, 1/16
Splits and changes the loop cycle
set in the TIME parameter.
BALANCE 0–
50
–100
Adjusts the volume balance
between the direct sound and the
effect sound.
FREEZE
This “freeze function” gives the effect of making sounds sustain indefinitely.
Parameter Value
(Bold: default)
Explanation
ATTACK
0– 30 –100
Sets the fade time until the effect
sound is output.
RELEASE 0– 30 –100
Sets the fade time over which the
effect sound disappears.
DECAY 0– 30 –100
Adjusts the decay of the effect
sound.
SUSTAIN 0–
30
–100
Adjusts the sustain of the effect
sound.
BALANCE
0– 50 –100
Adjusts the volume balance
between the direct sound and the
effect sound.