manualshive.com logo in svg

Boss MS-3, Parameter Manual

Share
Download
Boss MS-3 Parameter Manual Download Page 8

8

EFFECT

T. WAH

Parameter

Value

Explanation

MODE

Selects the wah mode.

LPF

Low pass filter. This creates a wah effect over a wide 

frequency range.

BPF

Band pass filter. This creates a wah effect in a 

narrow frequency range.

POLARITY

Selects the direction in which the filter will change in response 

to the input.
DOWN

The frequency of the filter will fall.

UP

The frequency of the filter will rise.

SENS

0–100

Adjusts the sensitivity at which the filter will 

change in the direction determined by the polarity 

setting.
Higher values will result in a stronger response. 

With a setting of 0, the strength of picking will have 

no effect.

FREQ

(FREQUENCY)

0–100

Adjusts the center frequency of the Wah effect.

PEAK

0–100

Adjusts the way in which the wah effect applies to 

the area around the center frequency.
Higher values will produce a stronger tone which 

emphasizes the wah effect more. With a value of 50 

a standard wah sound will be produced.

E.LEVEL

(EFFECT LEVEL)

0–100

Adjusts the volume of the effect sound.

D.LEVEL

(DIRECT LEVEL)

0–100

Adjusts the volume of the direct sound.
100=±0 dB

BASS T. WAH

Parameter

Value

Explanation

MODE

Selects the wah mode.

LPF

Low pass filter. This creates a wah effect over a wide 

frequency range.

BPF

Band pass filter. This creates a wah effect in a 

narrow frequency range.

POLARITY

Selects the direction in which the filter will change in response 

to the input.
DOWN

The frequency of the filter will fall.

UP

The frequency of the filter will rise.

SENS

0–100

Adjusts the sensitivity at which the filter will 

change in the direction determined by the polarity 

setting.
Higher values will result in a stronger response. 

With a setting of 0, the strength of picking will have 

no effect.

FREQ

(FREQUENCY)

0–100

Adjusts the center frequency of the Wah effect.

PEAK

0–100

Adjusts the way in which the wah effect applies to 

the area around the center frequency.
Higher values will produce a stronger tone which 

emphasizes the wah effect more. With a value of 50 

a standard wah sound will be produced.

E.LEVEL

(EFFECT LEVEL)

0–100

Adjusts the volume of the effect sound.

D.LEVEL

(DIRECT LEVEL)

0–100

Adjusts the volume of the direct sound.
100=±0 dB

AUTO WAH

Parameter

Value

Explanation

MODE

Selects the wah mode.

LPF

Low pass filter. This provides a wah effect over a 

wide frequency range.

BPF

Band pass filter. This provides a wah effect in a 

narrow frequency range.

RATE

0–100, 
BPM   – 

Adjusts the frequency (speed) of the change.
*  When set to BPM, the value of each 

parameter will be set according to the value 

of the “MASTER BPM” (p. 26) specified for each 

patch. This makes it easier to achieve effect 

sound settings that match the tempo of the 

song.

*  If, due to the tempo, the time is longer than 

the range of allowable settings, it is then 

synchronized to a period either 1/2 or 1/4 of 

that time.

DEPTH

0–100

Adjusts the depth of the effect.

FREQ

(FREQUENCY)

0–100

Adjusts the center frequency of the Wah effect.

PEAK

0–100

Adjusts the way in which the wah effect applies 

to the area around the center frequency.
Higher values will produce a stronger tone 

which emphasizes the wah effect more. With 

a value of 50 a standard wah sound will be 

produced.

E.LEVEL

(EFFECT LEVEL)

0–100

Adjusts the volume of the effect sound.

D.LEVEL

(DIRECT LEVEL)

0–100

Adjusts the volume of the direct sound.
100=±0 dB

WAH

Parameter

Value

Explanation

TYPE

Selects the type of wah.

CRY WAH

This models the sound of the CRY BABY wah 

pedal popular in the ’70s.

VO WAH

This models the sound of the VOX V846.

FAT WAH

This is a wah sound featuring a bold tone.

LIGHT WAH

This wah has a refined sound with no 

unusual characteristics.

7STR WAH

This expanded wah features a variable 

range compatible with seven-string and 

baritone guitars.

RESO WAH

This completely original effect offers 

enhancements on the characteristic 

resonances produced by analog synth 

filters.

PD.POS 

(PEDAL POSITION)

0–100

Adjusts the position of the wah pedal.
This parameter is used after it’s been 

assigned to an expression pedal or similar 

controller.

PD.MIN 

(PEDAL MIN)

0–100

Selects the tone produced when the heel of 

the expression pedal is depressed.

PD.MAX 

(PEDAL MAX)

0–100

Selects the tone produced when the toe of 

the expression pedal is depressed.

E.LEVEL

(EFFECT LEVEL)

0–100

Adjusts the volume of the effect sound.

D.LEVEL

(DIRECT LEVEL)

0–100

Adjusts the volume of the direct sound.
100=±0 dB

Summary of Contents for MS-3


















































Reviews:

No comments

Brands by name

Popular brands

Load more brands