7
EFFECT
Effect name
Explanation
FEEDBACKER
Generates feedback performance.
* Note that the notes you want to apply feedback
to must be played singly and cleanly.
* To use this, go to CTL,ASSIGN&MIDI SETTING;
then for NUM 1–4, M/M, CURRENT NUMBER, or a
CTL 1–4 switch connected to a CTL IN jack, assign
FUNC (FUNCTION) as F1: SOL/TRG or F2: SOL/TRG.
SUB DELAY
This is a delay with the maximum delay time of
1,000 ms. This effect is useful for making the sound
fatter.
COMPRESSOR
Parameter
Value
Explanation
TYPE
Selects the compressor type.
BOSS
This models the BOSS CS-3.
HI-BAND
This is a compressor that adds an even
stronger effect in the high end.
LIGHT
This is a compressor with a light effect.
D-COMP
This models the MXR DynaComp.
ORANGE
This is modeled on the sound of the
Dan Armstrong ORANGE SQUEEZER.
FAT
When applied heavily, this compressor
effect provides a fat tone with a boosted
midrange.
MILD
When applied heavily, this compressor
effect produces a sweet tone with the
high end cut.
STEREO *1
This selects a stereo compressor.
SUSTAIN
0–100
Adjusts the range (time) over which
low-level signals are boosted. Larger
values will result in longer sustain.
ATTACK
0–100
Adjusts the attack time.
LEVEL
0–100
Adjusts the volume.
TONE
-50–+50
Adjusts the tone.
*1
If a mono effect or a loop is connected after a stereo effect, the stereo effect
is lost.
LIMITER
Parameter
Value
Explanation
TYPE
Selects the limiter type.
BOSS
This selects a stereo limiter.
RACK 160D
This models the dbx 160X.
VTG RACK U
This models the UREI 1178.
THRESHOLD
0–100
Adjust this as appropriate for the input
signal from your guitar. When the input
signal level exceeds this threshold level,
limiting will be applied.
RATIO
1:1–INF:1
This selects the compression ratio used
with signals in excess of the threshold
level.
LEVEL
0–100
Adjusts the volume.
ATTACK
0–100
Adjusts the attack time.
RELEASE
0–100
Adjusts the release time.
* If a mono effect or a loop is connected after this effect, the stereo effect is lost.
