manualshive.com logo in svg

Boss MS-3, Parameter Manual

Share
Download
Boss MS-3 Parameter Manual Download Page 38

38

EFFECT

By assigning a desired parameter to the virtual expression pedal, 

you can produce an effect as though you were operating a physical 

expression pedal to change the volume or tone quality in real time.
The virtual expression pedal system provides the following two types 

of functions, and you can use the SOURCE setting for ASSIGN 1–8 to 

choose the desired type.
*  If you want to use the internal pedal or wave pedal, set the ASSIGN 

parameter MODE to “MOMENT.”

Internal pedal

If SOURCE is set to “INT PDL,” the virtual expression pedal will begin 

operating when started by the specified trigger (INT PDL TRIGGER), 

modifying the parameter specified by TARGET.

The value changes in a curve

When the trigger occurs

Wave pedal

If SOURCE is set to “WAVE PEDAL,” the virtual expression pedal will 

cyclically modify the parameter specified by TARGET in a fixed wave 

form.

Always changes in a fixed curve regardless of the 

actual pedal

About the Range of a Target’s Change

The value of the parameter selected as the target changes within the 

range defined by “Min” and “Max,” as set on the MS-3.
When using an external footswitch, or other controller that acts as 

an on/off switch, “Min” is selected with Off (CLOSED), and “Max” is 

selected with On (OPEN).
When using an external expression pedal or other controller that 

generates a consecutive change in the value, the value of the setting 

changes accordingly, within the range set by the minimum and 

maximum values. Also, when the target is of an on/off type, the 

median value of the received data is used as the dividing line in 

determining whether to switch it on or off.

When using the footswitch:

A

llo

w

able P

ar

amet

er

Settings R

ange

OFF

ON

MAX

MIN

When using the expression pedal:

When the pedal is

fully raised

When the pedal is

fully advanced

0

127

MAX

MIN

A

llo

w

able P

ar

amet

er

Settings R

ange

When controlling the On/Off target with the expression pedal:

Value

ON

OFF

When the 

pedal is fully 

raised

When the pedal 

is advanced 

halfway

When the 

pedal is fully 

advanced

Degree to which 

expression pedal Is 

depressed

0

127

*  The range that can be selected changes according to the target 

setting.

*  When the “minimum” is set to a higher value than the 

“maximum,” the change in the parameter is reversed.

*  The values of settings can change if the target is changed after 

the “minimum” and “maximum” settings have been made. If 

you’ve changed the target, be sure to recheck the “minimum” 

and “maximum” settings.

Virtual Expression Pedal System (Internal Pedal/Wave Pedal)

Summary of Contents for MS-3


















































Reviews:

No comments

Brands by name

Popular brands

Load more brands