8
Making connections
fig.4-1
* To prevent malfunction and/or damage to speakers or other devices, always turn down
the volume, and turn off the power on all devices before making any connections.
* If there are batteries in the unit while an AC adaptor is being used, normal operation will
continue should the line voltage be interrupted (power blackout or power cord
disconnection).
* If you are using batteries, the power will be turned on when a connector plug for your
amp or speaker is inserted into the OUTPUT jack.
* For details on installing the batteries, refer to “Installing batteries” (p. 7).
* For details on pedal switches that can be connected to the PHRASE SHIFT jack and
REVERSE jack, refer to p. 20, 21.
* Do not connect headphones to the OUTPUT jack. Doing so may damage the headphones.
* Howling could be produced depending on the location of microphones relative to amp.
This can be remedied by:
1. Changing the orientation of the microphone(s).
2. Relocating microphone(s) at a greater distance from speakers.
3. Lowering volume levels.
* If the amp and microphone are close together, the sound played back from the amp may be
picked up by the microphone. If you record or overdub in such a state, the amp playback
picked up by the microphone will also be recorded. You should separate the amp and
microphone so that the playback from the amp is not picked up by the microphone.
Pedal switch
(sold separately)
CD/MD player
Microphone
Electric guitar
AC adaptor
(sold separately)
Guitar amp
Jack type
AUX IN jack : Stereo miniature phone
other jacks : 1/4 inch phone
Headphones
Jack
Summary of Contents for Loop Station RC-20
Page 15: ...15 Memo ...
Page 36: ...G601729402 ...
