Boss Snowplow TGS 1100, Owner'S Manual

Page: 9 / 20

Installing the Spreader
Controller
Mount the controller in the cab where it does not interfere
with vehicle operation or visibility.
Important:
Do not mount the controller in a location
that vehicle occupants could contact it during a crash.
1. Remove the mounting bracket from the controller
(
Figure 13 ).
1 2
3
1
3
2
G031015
Figure 13
1. Mounting bracket bolt
3. Sheet-metal screw
2. Mounting bracket
2. Attach the mounting bracket to the vehicle using 2
sheet-metal screws (
Figure 13 ).
3. Attach the controller to the mounting bracket with the
previously removed bolts.
Note:
Position the controller screen so that it is clearly
visible to the driver.
4. Connect the wire harness controller connector to the
controller.
9