STEERING WHEEL CONTROL
Press the SRC repeatedly to select the
SWC mode, the message will like
following as below :
There are 2 KEY for no more than 12
buttons to select.
For first time use this function, input a
key (such as 0.38,0.38 is a magnitude
of voltage, according to your car )
through the steering remote and
show in button 1 position.
Use the VOL knob or the </> button to
do selection.
First select Assign begin setting;
then select the input(0.38) and press
SEL or ENTER to confirm;
0.38
Then select a function icon such as
will show in button 1 position and select
to confirm and back to home menu
that means select finish.
The function of the icons as follow:
To begin function save.
After selection to confirm
operation.
To cancel the input and
resume load.
When electric resistance is too
low, select this icon to increase.
When electric resistance is too
high, select this icon to reduce.
All manuals and user guides at all-guides.com
