BOSER Technology HS-6238 Manual Download Page 43

Page: 43 / 95

USB Device Legacy Support:

This system board supports Universal Serial Bus (USB) devices.

If detected, USB controller legacy mode will be enabled. If not

detected, USB controller legacy mode will be disabled.

4.7 Power Management Setup

The Power Management Setup allows user to configure the system for
saving energy in a most effective way while operating in a manner
consistent with his own style of computer use.

AMIBIOS SETUP – POWER MANAGEMENT SETUP

ACPI Aware O/S

Available

Options:

Sleep State

S1/POS

Power Management/APM

Enabled

Yes

Suspend Time Out

Disabled

Keyboard & PS/2 Mouse

Monitor

System Thermal

Ignore

Power Button Function

On/OFF

Restore On AC/Power Loss

Last State

Wake Up On Ring

Disabled

Wake Up On LAN

Disabled

Wake Up On PME

Disabled

Resume By alarm

Disabled

Alarm Date

Alarm Hour

ESC:Exit

:Sel

Alarm Minute

PgUp/PgDn: Modify

Alarm Second

F1:Help

F2/F3:Color

ACPI Aware O/S:

This item is the Advanced Configuration and Power Interface

(ACPI) function switch. The available options are Enabled, and
Disabled.

Sleep State:

This item serves as the switch setting of STR (S3) or POS (S1)
function. Configuration options are S3/STR, and S1/POS.

Power Management/APM:

Set this option to Enabled to switch on the APM (Advanced Power

Management). The available options are Enabled, and Disabled.

Summary of Contents for HS-6238
































































































Search results

Summary of Contents for HS-6238

Reviews:

Related manuals for HS-6238

Brands by name

Popular brands

BOSER Technology HS-6238, Manual

Search results

Summary of Contents for HS-6238

Reviews:

Related manuals for HS-6238

Brands by name

Popular brands