BOSER Technology HS-6238, Manual

Page: 28 / 95

22
3.25 CompactFlash

Connector
The HS-6238 also offers an optional CompactFlash

connector which
is IDE interface located at the solder side of the board. The designated
IDE2 connector, once soldered with an adapter, can hold
CompactFlash

cards of various sizes. Please turn off the power
before inserting the CF card. Inserting a CompactFlash

card into the
adapter is not a difficult task. The socket and card are both keyed and
there is only one direction for the card to be completely inserted. Refer
to the diagram below for the traditional way of inserting the card.
Co
mp
act
Fl
ash
TM
CE
M
ad
e
in
J
ap
an
/
Fa
br
iq
ue
A
u
Ja
po
n
CF
R
ea
r S
id
e
PC
B
So
ld
er
Si
de
V
ie
w
3.26 PC/104 Connectors
The PC/104 expansion bus offers provisions to connect all types of
PC/104 modules. With the PC/104 bus being known as the new
generation of industrial embedded 16bit PC standard bus, thousands
of PC/104 modules from multiple venders can be easily installed
onboard. The detailed pin assignment of the PC/104 expansion bus
connectors
CN11 and CN12 are listed on the following tables:
NOTE
：
The PC/104 connector allows direct plugging or stack-through
piling of PC/104 modules without requiring the PC/104 mounting
kit.