background image

Bosean Electronic Technology Co.,Ltd                        www.bosean.com

 

Tel:86-371-86533226                                                          Email

[email protected]

   

 

- 6 - 

5.3.1 Main interface function description 

 

a. Display the current date and time. 

b. Pump status indication. When the pump is normally turned on, 

the icon rotates and the color changes to green; when the air 

pump is normally closed, the icon does not rotate, and the color 

changes to gray. 

c. Buzzer status indication. When the gas concentration detection 

is in the normal state, the icon is green; when the gas 

concentration detection is in the low or high alarm state, after 

pressing "Mute", the icon turns red. 

d. Battery level indicator. The battery level is divided into six bars. 

When there are two bars remaining, the icon turns yellow and the 

screen prompts that the battery level is low. When there is one bar 

of power remaining, the icon turns red and the screen prompts that 

the battery power is low. When the power is exhausted, it will 

automatically shut down. 

 

5.3.2 Main interface display description 

The detector shows the real-time 

concentration of the relevant gas in the 

environment as shown in Figure 4 under 

the normal detection state. 

 

                                                                                         

Figure 4 

 

Summary of Contents for BH-4M





















Reviews: