Bosean Electronic Technology Co.,Ltd www.bosean.com
Tel:86-371-86533226 Email:
- 12 -
Figure 9 Figure 10 Figure 11
5.6.2 Alarm setting
In the main menu interface of the detector, select the alarm setting
icon and click the middle button to enter the alarm setting interface
(Figure 12). The left side of the figure shows the gas options, and
the right side shows the alarm settings. Follow the instructions in
the navigation bar to set the operation.
There will be a corresponding prompt on the screen when the save
succeeds or fails (Figure 13).
Note: The low value must be less than the high value.
Figure 12 Figure 13 Figure 14
5.6.3 Calibration setting.
Warning: It is strictly forbidden for
non-professionals to perform this
calibration and other operations.
Figure 15
