AM 259777 Rev.00 PDF
August 14, 2001
25
Reference
Connecting other playback equipment
Other playback components such as an audio CD changer can be connected to the AUX
inputs on the rear panel of the media center.
Figure 23
AUX input connections
Using digital audio connections
If your TV, VCR, tape deck, or AUX component has electrical digital audio connections, you
may connect them to the media center using the corresponding DIGITAL connector. You will
need a 75
Ω
cable with RCA connectors (such as a video cable).
Using optical digital audio connections
If your TV, VCR, tape deck, or AUX component has an optical digital audio connection, you
may connect it to the media center using the OPTICAL INPUT/OUTPUT connectors. You will
need an optical digital cable to make this connection.
Note:
Before you can listen to a source through the OPTICAL input, you need to assign the
OPTICAL connection to TV, VCR, TAPE or AUX. See your operating guide for instructions on
using the system settings menus.
R
L
AUDIO
OUT
TV
SENSOR
IR
EMITTER
SERIAL
DATA
SPEAKER
ZONES
1
2
1.1A
33V
DC POWER
AM
FM
75
ANTENNA
OPTICAL
OPTICAL
INPUT
OUTPUT
AUDIO OUTPUTS
DIGITAL
DIGITAL
R
L
RECORD
DIGITAL
R
L
DIGITAL
R
L
DIGITAL
R
L
DIGITAL
R
L
TAPE
AUDIO INPUTS
AUX
VCR
TV
VIDEO INPUTS
COMPOSITE
S-VIDEO
COMPOSITE
S-VIDEO
VIDEO OUTPUTS
CD changer or other playback equipment
