12
August 14, 2001
AM 259777 Rev.00 PDF
System Installation Instructions
Making a plug-in cable speaker connection
Figure 8
A plug-in cable type
speaker
1.
Match the correct cable to the corresponding speaker location. Front speaker cables
have blue RCA connectors at one end, with L, R, or C molded into both the RCA connec-
tors and the speaker connectors at the other end. Surround speaker cables have orange
RCA connectors at one end, with L or R molded into both the RCA connectors and the
speaker connectors at the other end.
2.
Insert the speaker connector of each cable fully into the jack on the rear of each of the
five speakers. Match the ridge of the connector to the notch at the top of the jack.
3.
Connect each cable to the corresponding jack on the Acoustimass
®
Plug the blue connectors into the matching left front, center, and right front jacks. Plug
the orange connectors into the matching left surround and right surround jacks.
Figure 9
Speaker connections to the
Acoustimass module
OUTPUTS TO
CUBE SPEAKERS
AUDIO
INPUT
POWER
FRONT
SURROUND
100-120/200-240V AC
50/60 Hz
350W MAX.
L
C
R
L
R
Front speakers
Left
Center
Right
Surround speakers
Left
Right
To FRONT L
To FRONT C
To FRONT R
To SURROUND L
To SURROUND R
