AM 259777 Rev.00 PDF
August 14, 2001
15
System Installation Instructions
Connecting your TV to the system
The media center provides audio and video connections for your TV. See Figure 12.
Making audio connections
Using the supplied stereo audio cable, connect the left (L) and right (R) audio outputs on the
rear panel of your TV to the L and R TV audio inputs on the rear panel of the media center.
Making video connections
Using the supplied video cable (with yellow connectors), connect the COMPOSITE video out-
put on the rear panel of the media center to the VIDEO INPUT on the rear panel of your TV.
Note:
If you prefer to use S-video or component video connections, see the following infor-
mation on alternate video connections.
Figure 12
Media center-to-TV video
and audio connections
Alternate video connections
Before using either of these alternate video connections, you will need to change the video
output setting in your system. See your operating guide for instructions.
S-VIDEO
The S-VIDEO OUTPUT provides a higher quality picture on your TV than the COMPOSITE
VIDEO OUTPUT. This jack is provided on many TVs. To make this connection you will need to
use the S-video cable which is included with your system.
Component video
Some newer televisions are equipped with component video input jacks. Component video
consists of three separate video signals (Y, Pb, and Pr) which deliver a very high quality pic-
ture to your TV.
TV
SENSOR
IR
EMITTER
SERIAL
DATA
SPEAKER
ZONES
1
2
1.1A
33V
DC POWER
AM
FM
75
ANTENNA
OPTICAL
OPTICAL
INPUT
OUTPUT
AUDIO OUTPUTS
DIGITAL
DIGITAL
R
L
RECORD
DIGITAL
R
L
DIGITAL
R
L
DIGITAL
R
L
DIGITAL
R
L
TAPE
AUDIO INPUTS
AUX
VCR
TV
VIDEO INPUTS
COMPOSITE
S-VIDEO
COMPOSITE
S-VIDEO
VIDEO OUTPUTS
R
L
VIDEO
IN
AUDIO
OUT
TV
connector
panel
TV
