Bosch XQG100-WDU285H80W, User Manual And Installation Instructions

Page: 43 / 56

Troubleshooting
en
43
Fault Cause and troubleshooting
The filters in the water inflow are blocked.
▶
Clean the filters in the water inflow.
The tap is turned off.
▶
Turn on the tap.
The water inlet hose is kinked or jammed.
▶
Ensure that the water inlet hose is not kinked or
jammed.
lights up. The temperature is too high.
▶
Wait until the temperature has dropped.
▶
→ "Cancelling the programme", Page 32
Water level is too high.
▶
Select a suitable programme for draining.
→
"Programmes", Page 26
Detergent dosage is too high.
▶
Immediate measure: Mix one tablespoon of fabric
softener with 0.5 litres of water and pour the mix-
ture into the left-hand compartment (not for outdoor
clothing, sportswear or items stuffed with down).
▶
Reduce the amount of detergent for the next wash-
ing cycle with the same load.
Drum cleaning is required.
▶
→ "Cleaning the drum", Page 37
"H:95" lights up altern-
ately with End. The water pressure is low.
▶
See
→
" ", Page 43
All other error codes. Malfunction
▶
Call the after-sales service.
→
"Customer Service", Page 52
The appliance is not
working. The mains plug of the power cord is not plugged in.
▶
Connect the appliance to the power supply.
The circuit breaker in the fuse box has tripped.
▶
Check the circuit breaker in the fuse box.
There has been a power cut.
▶
Check whether the lighting in your kitchen or other
appliances are working.
The programme does
not start. You have not pressed .
▶
Press .
Door is not closed.
1.
Close the door.