Cleaning and maintenance
en
49
Cleaning the filter in the
condensation container
Note:
The filter in the condensation
container cleans the condensation
water, which is used during the
appliance's automatic cleaning cycle.
1.
Pull out the condensation container
horizontally.
2.
Pour out the condensation water.
3.
Remove the filter.
4.
Clean the filter under warm, running
water or in the dishwasher.
Note:
You can use a soft brush to
clean off more stubborn dirt.
5.
Push the filter in until you feel it lock
into place.
Caution!
If the filter is not inserted, fluff can
find its way inside the appliance
and damage it.
Only operate the appliance with the
filter inserted.
6.
Push the condensation container in
until you feel it lock into place.
Cleaning the base unit
You can clean the appliance's base unit
if it has fluff in it, for example.
Note:
Allow the appliance to cool down
for approximately 30 minutes after use
before commencing cleaning.
Clean the base unit as follows:
1.
To open the maintenance flap, take
hold of it at the top at both sides and
pull it down.
2.
Clean the maintenance flap with a
soft, damp cloth.