Appliance care
en
53
3.
Turn the condensation container
180° onto its underside and insert
the stopper.
4.
Push the filter in until you feel it lock
into place.
Caution!
If the filter is not inserted, fluff can
find its way inside the appliance
and damage it.
Only operate the appliance with the
filter inserted.
The condensation container is now
ready for the appliance care
programme.
Note:
If you are draining the
condensation water from the appliance
using the drain hose, reverse these
steps
after
running the basic or
intensive appliance care programme.
Running the basic appliance
care programme
To remove any dirt deposits in the
appliance, you can run the basic
appliance care programme.
Note:
After a certain period, your
appliance will automatically recommend
that you run the basic appliance care
programme.
’‘§“
will then appear on
the display for 5 seconds before the
programme starts, and again once the
programme ends. This message will
appear repeatedly until you have run the
basic appliance care programme
through to the end.
Run the appliance care programme as
follows:
1.
Prepare the appliance for appliance
care.
2.
Set the programme to position 1.
3.
Press and hold
ö
(Iron Dry). At the
same time:
4.
Set the programme to position 4.
’˜‚
and the programme duration will
now alternate on the display.
#
+
3
;
#
+
3
;
