TUMBLE DRYER
r120085e -15/10
04.99
Error
no.
Test / Procedure
Possible cause
Error display
Re 8
D
Power module defective.
Start “BW cupboard dry”
test program.
On the power module
measure the drive voltage
(mains voltage) for heater
E1, 2, 3.
E
Excessive contact
resistance in sliding contact
system.
See Error number 11 E.
9
Heater continuously
on.
(Dryer not started.)
A
Heater defective.
Test heater and cable.
B
Power module defective.
See Error number 8 C.
10
– Washing not drying
properly,
– Too damp.
A
Wrong programme selected. Customer information:
Select higher degree of
dryness.
B
Door switch or power
module defective.
See Error numbers 15 A
and 15 B.
C
Excessive contact
resistance in conductivity
system.
Start “Gentle dry” test
program. Short-circuit
between the agitator and
drum.
If an error is displayed:
Test sliding contact system
and internal contact
between agitators for
continuity.
Max. 1 k
Ω
between agitator
and Pin 3 on the plug.
Max. 1 k
Ω
between drum
and Pin 1 on the plug.
If resistance is o.k.:
Repeat test program, with
jumper between plug-and-
socket connection X11-15.1
and X11-15.3. If there is no
error display, do not replace
the power module.
